Our 'cold-fired', liquid ceramic materials provide superior quality, eco-friendly mineral/metal bonding systems that transcend the definition of concrete.
Our water-activated, high performance ceramic concrete / coating materials can be poured, sprayed, trowled and slurried, forming a rock hard matrix within minutes, with working times adjustable from a few minutes to 30 mins.
They strongly self-bond (eliminating "cold joint” problems), achieve 5000 psi in 3-hours, 7000 psi in 24-hours and 10/12,000 psi in 28 days, bond strongly to and do not corrode metal, naturtally bond cellulose (wood, plant fiber, bamboo, hemp, kenaf, etc.), resist mold/moss, withstand temperatures up to 2500 C, can be applied in hot, cold and wet weather, and most importantly can be conveniently produced and applied using conventional concrete application technologies.
As our products do not contain any toxic ingredients whatseoever, including fly ash, there are no environmental and/or regulatory concrete run off, clean up problems.
Mold. It grows on bathroom walls, it makes basements smell bad, and it ruins perfectly good loaves of bread. And if you're allergic to it, there's a good chance that mold will add to your misery.
The spores from common molds function much like the pollen from ragweed. If you inhale the spores, you could get a case of allergic rhinitis, otherwise known as hay fever -- an unpleasant combination of runny nose, sneezing, watery eyes, itching, congestion and coughing. And if you have asthma, the spores may trigger attacks. More than 80 types of mold have been associated with lung, nose, and throat problems, according to the American College of Allergy, Asthma, and Immunology (ACAAI). (What's causing your allergies? Take this test and find out.)
It's possible that mold may even lead to the development of asthma. Until recently, there was no strong evidence that mold could cause asthma, and there's still no medical consensus that it does. But a study published in Environmental Health Perspectives in 2005 found that children who grew up in homes with a mold odor had more than a 100 percent chance of developing asthma in the following six years. (How bad is your asthma? Get personalized recommendations to manage it better.)
Fortunately, only about 25 percent of people with allergies are allergic to mold, according to the American College of Occupational and Environmental Medicine (ACOEM). The organization estimates that 10 percent of Americans are allergic to mold, and for about half of them, the allergy may result in an actual illness. The good news is that you can reduce your exposure to mold with a few simple steps.
What is Mold, and Where Does It Grow?
Mold is a type of fungus, a diverse kingdom that also includes mushrooms and yeasts. Unlike plants, molds and other fungi feed on organic material, whether it's a rotting tree or a carpet in your basement, by breaking them down and absorbing their nutrients. (Learn about other common environmental allergens.)
Mold thrives in warm, moist environments. The air can be full of it in warm summer months, often causing seasonal cases of hay fever. In the South, where it's warm and humid enough for mold to live all year long, allergies to outdoor molds can be a constant nuisance.
Molds can live indoors, too. They've even been found in subfreezing temperatures: The only thing they need is oxygen, something to feed on, and moisture. A damp basement is the classic hotspot. Mold can also thrive on carpets in other moist places, such as basements, closets, and bathrooms. Other potential moldy places include tubs, shower stalls, air conditioners, humidifiers, garbage cans, mattresses, and upholstered furniture.
How Do I Know If I Have a Mold Allergy?
Your doctor can give you a test to see if you're sensitive to mold, but the test isn't exactly foolproof. For one thing, doctors don't have samples for every common type of mold. (Molds can be surprisingly hard to grow in a lab). In most cases, however, you can find out with reasonable certainty if you have anything to fear from mold.
How are Mold Allergies Treated?
The best treatment for mold allergies is avoiding mold in the first place. But if you live in a place where mold is unavoidable, your doctor can offer additional help. You may need an antihistamine medication to control your symptoms. In severe cases, your doctor may prescribe a series of allergy shots to help reduce your sensitivity to mold.
What Can I Do to Get Rid of Mold?
Even if you aren't sensitive to mold, you don't want it to take over your house. Not only is it unattractive, but it can start to smell if left unchecked. If you happen to see a patch of mold growing in your bathroom or anywhere else in your house, you can quickly kill it with a dilute bleach solution or any other product that is specifically intended to treat mold or mildew.(Does your home also have these common household pollutants?)
There are also extra steps you can take to keep mold under control. Wash your bathroom once a month with a diluted bleach solution or another mold-killing cleaner, whether you see any mold or not. Cut down moisture in the bathroom by turning on an exhaust fan and opening a window after a shower. If you live in a humid climate, use an air conditioner or a dehumidifier to keep the humidity at no more than 50 percent. A recent ACAAI report also suggests sealing all leaks to prevent water accumulation, using a sump pump in basements to avoid flooding; and using an exhaust fan to ventilate the kitchen while cooking.
To prevent mold from taking hold, your kitchen and bathroom should be well ventilated. If possible, get rid of carpets in your basement or bathrooms. If a carpet or upholstery gets soaked, have it removed or replaced immediately.
References
Portnoy JM et al. Health effects of indoor fungi. Annals of Allergy, Asthma & Immunology. March 2005. 94: 313-319.
American College of Allergy, Asthma & Immunology. Mold allergy a bigger concern than toxic mold. March 18, 2005.
Jaakkola JJ et al. Home dampness and molds, parental atopy, and asthma in childhood: A six-year population based cohort study. March 2005. 113(3): 357-361.
National Jewish Medical and Research Center. Mold Allergy. March 2009.
The University of Texas School of Public Health. Fungus Among Us. 6/28/01.
The Cleveland Clinic. Allergy overview.
Medical College of Wisconsin. Mold Allergies. 03/17/05.
BioEd Online. The Kingdom Fungi. Introduction to Organisms.
The American Industrial Hygene Association. The Facts About Mold.
Thinking about building Green, saving labor costs and providing your clients with the highest energy efficient and safest home on the market?
Then TurtleWall is what you've been looking for!
No other Structural Insulated Panel System performs better than the patented proprietary TurtleWall SIP"S hybrid.
Goes up paint ready, no need for additional Sheetrock Tyvek and additional labor costs.
Provides ongoing energy efficiency savings of 80% to customers.
Provides customers with the safest, moisture, fire, mold, insect, sound, radioactivity, electromagnetic chaos, earthquake, tornado, hurricane and blast proof environment on the market.
100% made in USA and Canada with highest quality control standards. We are NOT distributors of Chinese made board...Nothing is imported from China.
TurtleWall...a true game changer.
Check out Test Results below...
Some additional information on TurtleBoard, the green, non-toxic alternative to Sheetrock...
Coming from an Indoor Air Quality and Building Science perspective, the problems with Sheetrock are endless.
Being made from glues and paper, Sheetrock is a favorite food for microbial growth since it gets soaked by water.
TurtleBoard, aside from being fire proof, is water proof.
Mold will not grow on this product!
I'll say it again...
MOLD WILL NOT GROW ON THIS PRODUCT!!!!!!!
So if you are thinking about remodeling or building green and keeping your family healthy and safe, TurtleBoard is the only way to go.
Here are some performance ratings for my green building friends...
Turtle Clan Global Advanced Green Building Products and Materials are the world's leader and highest-quality Magnesium Oxide Board (MgO Board) used in place of gypsum for interior and exterior wall applications
TurtleBoard™
Advancing construction innovation is what TurtleBoard™ products are all about. .
|
Our proprietary line of interior and exterior structural sheathing products are a new class of environmentally-friendly products made from a proprietary hybrid formulation of Magnesium-Oxide (MgO) and other inert minerals. Our unique manufacturing process utilizes innovative technology to create a superior board that's quickly defining the future of Green building products and materials. Here's why:
|
 TurtleBoard™ Advanced Structural Sheathing Material and Green Alternative to Sheetrock and OSB |
We are THE experts in Indoor Air Quality Testing for issues such as Mold, Radon, Air Pathogens, Lead and Asbestos in the Tri State Area. We also have a line of green, healthy alternatives to Sheetroc
ActiveRain Corp. is not responsible for the accuracy of the site's content (which is written by members of the ActiveRain Real Estate Network) and does not endorse the views of the real estate agents, mortgage brokers, and others listed here.
Powered by the ActiveRain Real Estate Network
© 2012 ActiveRain Corp. All Rights Reserved
